HIDRO VT GZO75-ES Professional Ozone Plant
Hydro VT type Ozone Generating Plant for pressure line water treatment. With Professional Ozone Generator, with compressor, oxygen concentrator, control by Logo!, venturi dilution system, pump and contact tower. Ozone production of 75 gO3/h, at a concentration of 65 g/Nm3. 400V, 3P+N, 50Hz, 5.6KW.
[Spanish design and manufacture] Ideal for injecting and maintaining high doses of ozone in a pressurized water pipe.
[High performance] Get high doses of dissolved ozone, and a homogeneous mixture, thanks to the pump, venturi and contact tower.
[Auto operation] Controlled by LOGO, with manual power regulation and time programmer.
[Simple Installation] You only have to connect the equipment to the pipe you want to treat and provide it with a light point.
[No replenishment of chemicals] Ozone is generated from the air we breathe.
[Maximum Security] The system controls the entire process and includes an ozone leak sensor.
Manufacturing in 10-15 days
Professional Ozone Generator
What is it used for?
This equipment is used to dose ozone in a pressurized water pipe, maintaining a constant ozone concentration. It is used to disinfect and purify water and pipes. Widely used in agricultural water treatment, for drip or sprinkler irrigation, in drinking water treatment, waste water, process water, cooling towers, swimming pools, aquariums, etc. Ozone is an excellent disinfectant, which allows you to maintain hygiene both in the water and in the pipes.
|Latest generation GZO75-ES model
|With compressor, oxygen concentrator at 95% purity and -30ºC Dew Point
|Ozone Dilution System
|Composed of pump, venturi, 316L stainless steel tank and anti-return safety system
|By controller Logo!. Daily programmer, alarm and maintenance manager.
|Wired Remote ON, Status Relays (Initiated, Generating, Fault).
Amps in Ozone, Compressed Air Pressure, Oxygen Pressure and Flow, Ozone Leaks, Door Opening.
In the plant: Redox control, maximum and minimum pressure switch in the tower, manometer. Optional dissolved ozone sensor.
|Outlet ozone electrovalve, Oxygen flowmeter with manual regulation. Stainless steel 316L motorized safety anti-return valve on the venturi.
|Included in the packaging
Maximum = 100g/Nm3
Optimum = 65g/Nm3
|400V, 50HZ, 3P+N
Ozone Generator = 3.4 KW
Pump = 2.2KW
|Inlet and outlet in Flange DN100
|1455 x 875 x 1920 mm (Width x Depth x Height)
|Hydraulic Working Pressure
|Between 0 and 6.5 bar
|Ǿ Solids < 1mm; Suspended solids (SS)<150mg/l; Density = 1 g/cm3 ± 5%
|0 - 0,4 bar
The room must be well ventilated, and provide an extraction system in case of leaks. Install sign with safety warnings. It is recommended that the room have a drainage box.
|2 years extendable indefinitely, with maintenance contract
|CE, BIOCIDA PT2, PT4, PT5, PT11
This HIDRO VT ozone plant includes a Logo! control from which different operating time slots can be easily and intuitively programmed throughout the day by means of a scheduler. When the unit receives the operating order, the refrigeration circuit is activated, and the compressor starts up, takes the air from the atmosphere, filters it, dries it and introduces it into the PSA, where the nitrogen is removed from the air and the oxygen is concentrated to 95% purity. This oxygen flow reaches the generation core, where the corona discharge is applied and the oxygen is converted into ozone. With the oxygen flow meter, the desired flow rate can be regulated. The ozone is then channelled to the venturi, where the ozone is injected into the customer's line water, homogenised in the tank and given a contact time for the ozone to react, disinfect and purify.
User manual, installation and commissioning.
Declaration of conformity.
Certificate of guarantee.
Compliance with the biocidal regulation.
Results of the Quality Test in the factory.
This GZO ozone generator uses high frequency corona discharge technology with ceramic dielectric.