GM7-E
Professional Ozone Generator, which works from compressed oxygen bottle or PSA oxygen concentrator. Ozone production of 7 gO3/h, at a concentration of 30 g/Nm3. 230V, 50-60Hz, 100W.
This ozone generator is air-cooled. Works from compressed oxygen bottle or PSA oxygen concentrator. It has an air inlet filter and a pressure regulator, manual control using an ON/OFF switch a power manual control potentiometer. With power indicator light and ozone amp consumption indicator. With input and output wall bushings: 8mm tube. Ready to plug and play.
Manufacturing in 30-40 days
Commercial Ozone Generator
Technical Sheet
What is it used for?
To disinfect and eliminate odors in cold rooms, refrigerated chambers, or handling rooms. Its modular assembly allows you to set up a network of generators with a single pneumatic line, saving costs and providing full centralized control of the system in one point.
Product Details
| Included in the packaging | 2 m power cable + 2 m ozone outlet tube + user manual |
| Control | Switch-on with manual START and GENERATE switches. Ozone power regulation through manual potentiometer |
| Ozone Generation system | One 3 gO3/h Module with borosilicate dielectric – Air cooled |
| Oxygen concentrator | Oxygen must be supplied by the client, from cylinder or PSA. The equipment does not include PSA |
| Compressed air unit | The equipment does not include compressors. Oxygen must be supplied by the client |
| Sensors | Ozone Amperes and Oxygen Pressure |
| Air/Oxygen flow | 15 - 50 lpm |
| Packed size | 320 x 350 x 250 mm |
| Electric Power | 100W |
| Weight | 3,7 Kg |
| Gas connection | Inlet and Outlet for 8 mm OD tube |
| Ozone concentration | From 2,5 a 3 gO3/h |
| Ozone Production | From 2,5 a 7 gO3/h |
| Power supply | 230v, 50-60 Hz |
| Gas quality | 95–99% oxygen purity, dried to -10ºC Dew Point |
| Room fittings | Place in a clean and dry space, free of grease and fumes |
| Source gas | The equipment requires an oxygen supply from cylinder or PSA |
| Working pressure | 0 - 0,4 bar |
| Humidity | < 90% |
| Room temperature | 1 - 35 ºC |
| Compuestos VOC'S | < 400 ppm |
| Sold from | 2015 |
| Last revision | 2021 |
| Made by | ZonoSistem |
| Certificates | CE, BIOCIDA PT2, PT4, PT5, PT11 |
| UFI number | G000-W09P-Y00M-TV8V |
| Made in | Spain |
| Warranty | 2 years warranty, extendable indefinitely with a maintenance contract |
Operation
This ozone generator from the GM range, when receiving a start command, opens the oxygen inlet solenoid valve, whose pressure is regulated with the pressure reducer. The oxygen from the cylinder is directed to the generation core, where corona discharge is applied and oxygen is transformed into ozone. With the oxygen flowmeter you can adjust the desired flow rate.
Included Documentation
Safety manual
User, installation, and commissioning manual
Maintenance manual
Declaration of Conformity
Warranty Certificate
Compliance with the biocidal regulation
Factory Quality Test results
Technology
This ozone generator uses high-frequency corona discharge technology with ceramic dielectric
